If you are swapping cards around in an AFF A700 or FAS9000, you need to halt the controller and do a bye from the loader prompt. The bye forces the system to repost and rescan all the hw installed. A power cycle from the service processor would do the same thing.
See:
Adapter card on FAS9000, AFF A700, and AFF A900 are missing from sysconfig after replacement
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Adapter_card_on_FAS9000%2C_AFF_A700%2C_and_AFF_A900_are_missing_from_sysconfig_after_replacement
Comments
Post a Comment